EMT Practice Test

1. Question Content...

---

Question1: A customer plans to enable support automation on a HPE ProLiant G7 server using Insight Remote Support with HPE Proactive Care services.
What should the customer do prior to registering its servers for Insight Remote Support?

Question2: A customer is building an isolated management network for Gen8/Gen9 servers. The customer plans to use the iLO federation feature for all of them.
What should the architect verify when proposing network infrastructure for this purpose?

Question3: A customer needs an API that meets the following requirements:
industry-standard

based on open standards

provides a programmable interface that uses a lightweight data model

datamodel that is

- simple
- remote
- secure
- extensible
What should the customer use?

Question4: Which tools can an architect use to check details about a hard drive error on an HPE ProLiant Gen9 server before the operating system is installed? (Select two.)

Question5: An architect is using HPE Power Advisor to assist in architecting an HPE BladeSystem solution that contains HPE Flexfabric interconnect modules.
Which information about the solution can the tool provide? (Select two.)

Question6: Which standards can be implemented in a data center to help reduce carbon foot print?

Question7: Which server technology will enable increased throughput, lower latency, and lower CPU utilization across the servers?

Question8: Which management tool should an architect demonstrate to explain tracking service events and warranty information?

Question9: Which tool should an architect use to research the technical specifications of various Smart Array controllers?

Question10: What is a benefit of using an I/O Accelerator?

Question11: A customer that runs a database server needs high speed access to the database files with a maximum latency of 5 ms.
Which internal disk technology offers the necessary performance?

Question12: Which statement describes HPE Datacenter Care services?

Question13: A small business customer is moving to a stack solution and needs an HPE ProLiant server that provides dense storage, good performance, virtualization capability, and easy expansion at a lower price point.
Which HPE ProLiant server should the architect recommend to meet the customer's needs?

Question14: A service provider is planning to migrate to a new cloud platform. The existing cloud solution uses VLANs for tenant network separation. However, the service provider is not satisfied with the scalability limits of the setup.

Question15: A customer is designing an infrastructure and plans to host multiple tenants in the environment. The customer needs several thousand segments to be used on a single physical network.
Which solution should the customer use?

Question16: What is the purpose of conducting a customer site survey?

Question17: An architect is proposing HPE Intelligent Power Discovery service for a customer's new data center.
Which component does the architect need to include in the proposal for this service?

Question18: A customer needs to encrypt local drives on its HPE Proliant Gen8 and Gen9 servers. The customer needs to manage the encryption centrally.
Which HPE products and features should the architect recommend to meet the customer's needs?

Question19: A customer has a VMware vSphere environment with a mix of ProLiant DL G5 servers. ProLiant DL G5 servers, and ProLiant BL Gen9 server blades. The customer plans to replace HPE Insight Control with HPE OneView as a monitoring platform.
What should the architect explain to the customer?

Question20: A customer is using an HPE BladeSystem c7000 enclosure with Virtual Connect 20/40 F8 modules. The customer plans to improve network redundancy between the VC modules by creating LACP aggregated links from each single VC module to two different physical ToR switches.
Which HPE networking technology should the architect recommend to the customer?

Question21: Which components are typically redundant in a tower server? (Select two.)

Question22: A customer requests a Proof of Concept for virtualization. To ensure a seamless deployment of virtualization, the customer needs to evaluate the various hypervisors and the associated management suites that integrate with the existing HPE server, storage and networking infrastructure.
Which virtualization solutions should the architect recommend to the customer for the Proof of Concept (Select two.)

Question23: An architect has designed an HPE BladeSystem with Flex-10D Virtual Connect that connects to HPE 5830 switches. The architect needs to ensure that the solution simplifies the customer's campus Ethernet.
Which additional HPE technology should the architect recommend to the customer?

Question24: A customer has acquired another company with a large install base of HPE BladeSystem servers with Virtual Connect managed by HPE OneView. The customer needs the ability to easily record its new assets in its configuration management database (CMDB).
Which approach should the architect recommend to the customer?

Question25: Which technology was invented by HPE to create an automated, energy-aware network between IT systems and facilities?

Question26: HPE Power Advisor is being used to assist in architecting an HPE BladeSystem solution that contains HPE Flexfabric interconnect modules.
Which information about the solution can the HPE Power Advisor provide? (Select two.)

Question27: A customer needs a high-level fault-tolerant solution for critical data. The customer uses eight large- capacity SAS drives as a single disk volume.
Which RAID level should the architect recommend to protect the customer against double drive failure?

Question28: An architect has designed a server solution for a customer that includes ProLiant BL460c Gen9 server blades with Smart Array P244br controller. The customer needs to be able to configure, manage, and troubleshoot the locally attached storage in this solution.
Which HPE tool should the architect recommend to the customer?

Question29: DRAG DROP
Sort the three sequential steps that are taken for network traffic processing with QoS rules in the correct order by dragging the actions from the left to the action sequence on the right. (Note: Not all actions will apply.) (Select three.)
Select and Place:

Question30: A solutions architect is designing an HPE ProLiant BladeSystem and HPE StoreVirtual storage solution for a customer, and needs to estimate power requirements.
Which HPE tool should the architect use?

Question31: DRAG DROP
Select all that apply.
Drag each HPE Proliant rack server profile on the left to the matching description in the right.
Select and Place:

Question32: A customer needs to improve the performance of a CPU intensive application running on an HPE ProLiant DL 360 Gen9 server with an Intel Xeon E5 processors. The architect proposes to add an Intel Phi coprocessor extensions to the server.
What should an architect verify to ensure the coprocessor will improve application performance?

Question33: What is a feature of the Apollo 4200 series Gen9 Server?

Question34: An architect is working with a customer to design a new data center that can take advantage of free- cooling.
Which HPE solution should the architect recommend to the customer?

Question35: Which HPE technology helps to address concerns about server interconnectivity and cable management, and the network effect of increased East-West server traffic when using VMware vMotion for virtual machine migration?

Question36: A customer is designing a deployment network that uses HPE ProLiant Gen9 servers.
What should the customer enable first to use IPv6 to deploy operating systems over the network?

Question37: Why does HPE OneView not affect operating systems security on monitored HPE ProLiant Gen9 servers?

Question38: A customer plans to transition from rack mount servers to blade servers. The customer has selected Virtual Connect as the network interconnect module for the c7000, allowing it to take advantage of network virtualization. The customer needs an on-premise management strategy that can take advantage of the RESTful API for integration into its Chef development operations model.
Which protocol should the architect recommend to support and manage the proposed HPE BladeSystem solution?

Question39: A customer needs to deploy SAP HANA. The customer needs a scale-out solution to accommodate an increase in workload over the next two years.
Which ProLiant series should the architect recommend to the customer?

Question40: Which functionality provides centralized health monitoring for HPE ProLiant servers?

Question41: A customer needs an HPE BladeSystem and iSCSi StoreVirtual storage that can boot from iSCSi volumes.
Which components must be included to meet customer requirements?

Question42: Which solution enables a customer to manage all operating system drivers and system firmware across the data center from one central location?

Question43: A customer needs an OpenStack-based cloud datacenter with several virtual machines that will be placed in multiple VLANs. The customer needs to use Virtual Extensible LAN (VXLAN) Or Generic Routing Encapsulation (GRE) technology to support multi-tenant traffic. The architect recommends the following HPE server equipment:
BladeSystem c7000 enclosure

Virtual Connect 20/40 F8 modules

BL460c Gen9 servers with FlexFabric 20Gb 2-port 650FLB Adapters

Which rationale supports the architect's recommended configuration?

Question44: How does HPE offer infrastructure as a service differentiator?

Question45: A customer plans to implement an in-memory analytics application on HPE ProLiant servers.
Which processor family should the architect recommend to the customer?

Question46: A customer plans to use Flat SAN technology to connect a new storage system.
Why would the customer choose the Virtual Connect Flat SAN technology connected to a 3PAR StorServ storage system versus a competitive solution?

Question47: A customer has a ProLiant DL based server solution. The customer is experiencing high write latency with its virtual desktop infrastructure running on this solution.
Which solution will increase the application performance and reduce the use of resources?

Question48: A customer needs to manage contract, warranty, and HPE Care Pack Information for its server and storage infrastructure from a single location. The customer also needs proactive expiration notifications for these contracts.
Which HPE tool should the architect recommend?

Question49: DRAG DROP
Select all that apply.
Click and drag the HPE Proliant Gen9 value on the left to match its customer benefit on the right.
Select and Place:

Question50: An architect needs to explain to a customer how power is monitored and managed in an Apollo 6000 solution.
Which HPE component should the architect describe to the customer?

Question51: An architect is designing a Citrix XenServer-based virtualization solution that runs on HPE ProLiant Gen9 servers.
Which design parameters should the architect take into consideration as part of the solution? (Select two.)

Question52: A customer needs to maximize density capability while reducing cooling requirements in its data center.
Which HPE solution will meet the customer's needs and extend the life of its data center?